Product Description
These 1 Watt LED Modules use a Luxeon equivalent LED for a light output that far surpasses that of standard LEDs. For use where a lot more light is required.
Ideal replacement for 5-10w Halogens.
They can pay for themselves with power saved in less than a year!
Each LED is sealed into an aluminium case with Silicone making the product splash proof to IP65 standard.
The built in Driver circuitry regulates input voltages from 12v-24vdc to the correct voltage and current to the LED Emitter, ensuring a long lifetime of 40,000 - 50,000 hours.
The Modules can operate from voltages as low as 6v!
Below, a kitchen cabinet illuminated with 3 × 1w LED Modules (in white).
The LEDs draw approx 1.3 watts each so the total power consumption for 3 Modules is just 4 watts. In power terms if used 24 hours a day every day it would cost approximately £5 per year to run 3 Modules, whereas 3 × 10w Halogens would cost approximately £36 to run per year. So the Modules would pay for themsleves with the power saved in less than 1 year!
The Modules can be supplied in any number up to 24 in a single chain. There is 8 inches (20cm) of wire joining each Module, depending on your installation you can cut the wire between Modules. For example you could have a chain of 2 Modules in one display cabinet and an extended wire going from the last module in the row to a single module in another cabinet.
Ideal for: Cars - Interior or exterior, Work Vans, Under Cabinet Lighting, Ornament Cabinets, Computer Cases, Trailers, Bars, Stairs & Steps, Interior Lights for Boats etc.
The 1 Watt LEDs are supplied with 3M self-adhesive padded tape pre-fitted for a quick installation. There are also mounting lugs on each side of the Module's case for an even more secure fitting.
5 Colours available - Warm White, Blue, Green, Amber, and Red
To calculate how many Modules you need to light an area, measure the total length you intend to light up.
Formula: Length to Light in Meters / 245 = Number of Modules required.
For example: if you wanted to light under a shelf measuring 1.5 Meters (1500mm) you need to divide 1500 by 245, this would give 6.12, round down to 6. So you would need 6 × 1W Modules.
Ideal For:
- Sign lighting
- Garden/Patio Lighting
- Kitchen Worksurface Lighting
- Footwell Lighting
- Wheel Arch
- I.C.E Lighting
- Cab Lighting Vans/Trucks
- Workshop/Shed Lighting
Product Specification
Module Dimensions | (L)39mm x (W)31mm x (H)12mm (L) 1 1/2" x (B) 1 1/4" x (H) 1/2 " |
Length of connecting wire between Modules | 200mm (8") |
Total length for a chain of 9 Modules | 1.3 Meters (52" or 4Ft 3") |
Rating | RATED AT IP65 (Splashproof) |
Case Material | Aluminium |
Viewing Angle | 80-160 ° |
Power Requirements Per Module | 110ma |
Voltage | 12-24vdc |
Brightness per Module (Lm = Lumens) | Red: 40-50 Lm Amber: 30-40 Lm Blue: 15-25 Lm Green:- 60-70 Lm White: 90-100 Lm |
Certifications | CE, RoHS |
Product Documents
Accessories
For more information about one of the products below simply click the name of the product.