The latest addition to our Litewave® Professional LED Strip range, has a protective Silicone Gel coating to protect the LEDs and circuit from moisture and splashes.
Silicone Gel is non yellowing, unlike Resin coated LED Strips which usually turn yellow over time.
The RGB LED Strip, uses on-board Constant Current to protect the 60 LEDs per Meter. The LEDs are tightly close together with a gap of just 16mm between LEDs.
This Strip is usually used when an extremely bright effect is necessary or for use in a profile with a depth of at least 15mm to create a seamless light without any dots. The Silicone coating provides an addition layer of protection. Use with our Profiles towards the bottom of the page for Neon look lighting.
Capable of displaying any visible colour including cool whites & warm whites
The LED Strip is 24vdc to allow long runs with minimal voltage drop.
Constant Current RGB (Colour Changeable) LED Strip has transistors on the circuit board regulating the current and voltage to every LED for each of the 3 primary colours; Red, Green, and Blue. This ensures maximum operating brightness and a lifetime in excess of 50,000 hours.
Many online retailers make wild claims of up to 100,000 hours, this is highly unlikely without a significant decrease in brightness or failed LED Emitters unless Transistorised Electronics are used.
An additional 130 Components per Meter are used to protect each of the 3 emitters within every LED.
Advantages:
- Uniform colour and brightness
- Longer distances between Colour Drivers and Controllers without the small voltage drop affecting the brightness and colour
- Reliable
- Long Lifetime
Capable of displaying any colour including white and warm whites when used with one of our colour controllers below.
This is proven technology and we have already been supplying it to our installers for several years.
Each length includes a 1M flying lead for easy connection to a colour controller.
Our Professional Constant Current Strip has the Constant Current Ciruitry built into the circuit with the LEDs, so it can be supplied with 24vdc from any constant voltage Transformer.
You will also need a Power Supply, shown below.
Should you require LED Strips pre-made to fit to your kitchen, roof lights, alcoves or coving, we can supply a system made to your exact requirements, with wires pre-fitted saving you time & money. Corners and room size are no problem Free Quote
UK Based, Worldwide delivery
Secure Online Ordering
Fast dispatch of all orders
Prices include VAT
