Product Description
This attractive Spotlight/Downlight is IP67 Rated allowing it to be used in any wet environment such as Bathrooms, Showers, Saunas, Gardens and even Driveways.
Draws just 3 Watts whilst producing light equivalent to a 30 Watt Halogen
The rugged design makes them ideally suited for use in domestic and commercial settings, we have sold a large number of these RGB Lights for use in restaurant chains around the country. They are very reliable.
The light fitting is finished with a flush fitting brushed 304 Stainless steel bezel.
Due to the built-in dual voltage constant current driver the lamps will operate at the same brightness over all colours from 8v-24vdc. This means they can be used long distances away from the power supply (Transformer) and colour controller. The voltage drop over long distances will not affect the colour or the light output. Distances of 50 Metres or more are possible by using the Spotlights on our 24v Power Supplies.
Where required it will fit into a GU10 / MR16 Lamp Holder.
The Multi Chip LED has Red, Green, and Blue Emitters enabling the product to display 16.7 Million Colours when used with a Lightbox or Wi-Fi Lightbox, or 2.1 Million Colours if used with a Flexidriver.
Up to 20 RGB Spotlights can be controlled from a single Lightbox or Flexi Driver.
Even more control is possible including sound activation by using the ZAP+ or ZEN Controller.
*Also controllable from Smartphone or Tablet using our Lightbox (Blueooth) and Wi-FI Lightbox.
- Rugged 12mm thick glass optic
- Stainless Steel
- Aluminium body protected with enamel coating for a long maintenance free lifetime
A plastic sleeve is supplied for fitting in-ground (concrete).
Ideal for lighting:
- Bath/Shower Plinths/Shower Tray
- Plinths in Kitchens
- Baseboards
- Garden
- Driveways
- Restaurants / Bar / Clubs
- Stage / Theatre
- 3 Year Warranty
Click here to see the wiring diagrams for the RGB Spotlights
Product Specification
Voltage | Dual 12/24vdc |
LED | 1 × 3W RGB |
Power | 3W (250ma) |
Halogen Equivalent | 30w |
Glass | 12mm Deep |
Beam | 45 Degrees |
IP Rating | IP67 (Waterproof, temporary submersion) |
Load Bearing | 1450 KG |
Hole Cut Diameter | 40mm |
Minimum Recess Required | 70mm, 78 mm recommended |
Flange Diameter | 50mm) |
Dimensions without sleeve | 65mm x 40mm |
Dimensions with sleeve | 80mm x 72mm |
Lifetime | 40-50,000 hours |
Flange Material | 304 Stainless Steel |
Warranty | 3 Years |
Certifications | CE, RoHS |
Product Documents
Accessories
For more information about one of the products below simply click the name of the product.