Colour Changeable (RGB) LED Neon Tubes (12vdc)

Until very recently the only option for lighting around perimeter of buildings has been Neon or Fluorescent Tubes.

Suitable for Interior or Exterior Use

Our latest high-end technology makes Neons a thing of the past.

By using a milky Polycarbonate Tube and colour changeable LEDs within it is now possible to have a colour changing tube with the appearance of Neon but with the advantage of LEDs.

The LEDs are supplied pre-soldered onto a rigid circuit board, the circuit board uses on-board constant current electronics to provide a stable voltage and current to the LEDs. This ensures a very long lifetime of at least 50,000 hours (half-life).

The circuit board has a resin encapsulation sealing it against moisture and water to IP65 standard. The circuit board is simply slid into place along holding runners within the Tube, so easy replacement is possible if required in the future.

The Polycarbonate Tubes can be capped and sealed on the ends and on any internal or external corners.

This is an architectural grade product. It's single colour counterpart is currenty used on:

• Petrol Stations
• High-Rise Buildings
• Sky Scrapers

Choose from any colour in the visible spectrum

There is virtually no limit to how many of the LED Neon Tubes can be controlled from our modular control systems.

We have a range of colour controllers available (below) from a simple 90 second colour change using the Flexidriver, to Remote Control, DMX Control, and even control from a Smartphone or Tablet using a free doanloadable app on our Lightbox (Bluetooth) or an IP address on any web enabled device using our wLightbox (Wi-Fi).

We stock a range clips, end caps, and corners.

If you are illuminating the facade of a building we recommend you provide a list of measurements so we can supply the Tubes pre-cut and wired to specification, this will make installation easier and faster saving you money.