LED Tile Lighting Kit - Dotless (Single Colour)

For a 'Tron' like light band set into tiles you will need to use our Tile Lighting Kit.

Designed specifically for bathrooms to be placed between a row of tiles and grouted in, they can be placed vertically or horizontally. We supply our Litewave Pro LED Strip ito be fitted within the Aluminium Channel, then the opaque cover is clipped into the profile which gives a finished appearance and also protect the LEDs from water and moisture in the air.

When switched off it looks like a decorative Tile Trim, when switched on it produces a neon look line of light.

It is critital to use the included Litewave Pro LED Strip. This will ensure a very long lifetime, due to the on-board drivers - these are not found on inferior strips. Many Strips can have LEDs fail producing dark patches, our Pro Strip is designed to avoid that happening.

Included with the kit:

• Aluminium Profiles (the LED Strip sits inside these), and Frosted Polycarbonate Cover

• Litewave ® Professsional 120/M LED Strip

• PSU /LED Driver (rated for the kit size)

After receiving the order we will contact you to confirm the size of the room or lighting required so any adjustments can be made prior to us shipping the order to you.

For us inside shower enclosures or areas with a high level of water splashing we recommend using a bead of silicone along the slots of the Aluminium prior to fitting the cover, as this will form a gasket and give an added level of protection against water.