Product Description
A 10 Watt Dimmable LED Downlight with a very attractive polished chrome finish. The complete lighting fixture is included, with LED, 90 Degree Reflector, and Transformer.
Unlike cheap standard LED Downlights this uses COB Chip-On-Board Technology where multiple LED Emitters are placed on a single Chip instead of small separate LEDs on a printed circuit board. This produces a bright and concentrated light output which looks very similar to halogens.
This is an ideal replacement for power hungry 50w GU10 and MR16 Halogens. It will fit straight into the existing ceiling hole that is left by the Halogen Holders.
The light can be tilted just where you need it with the adjustable 30° built-in gimble.
- Dimmable 1-100%
- Flicker Free
- Tiltable
A low voltage Driver (Transformer) is included with the recessed downlight.
Connection is simple with just 2 wires going to the input of the Driver from the mains. The Downlight connects to the Driver via a quick connector.
- Lifetime: 40,000 hours
- No UV: Suitable for lighting in rooms that contain paintings, the LED will not cause UV degradation.
- No projected heat.
- Ultra Low Power: Save up to 80% on your lighting bill!
- Environmentally friendly: Requires less energy to power and does not contain Mercury.
Dimmable (Varilight Dimmer or suitable LED Wall Dimmer recommended)
Product Specification
Diameter including flange | 82mm |
Body Depth | 80mm |
Hole Cut Diameter | 68mm |
Power | 10w LED |
Dimmable | Via Standard wall dimmer |
Dimming Range | (1% to 100%) |
LED Type | Chip-on-Board |
Voltage | Worldwide (100vAC - 240vAC) |
Beam Angle | 60/90 degrees |
Luminous Flux (Lm) | 463Lm |
Colour Temperature | Warm White - 3000K |
Lifetime | 40,000 Hours |
IP Rating | 40 |
Certifications | CE, RoHS, IP40 |